Rms-technologies R325P DRIVER Bedienungsanleitung PDF herunterladen (Seite 5)

1. FEATURES

• Single Axis Driver for Bipolar step motors

• Operates from +12 to 48 VDC

• Phase currents from 0.3 to 3.0 Amp Peak

NOTE: Phase current of 2.7 Amp and above REQUIRES an additional heatsink,

make sure the temperature of the bracket does not exceed 45° C.

• Hold current reduction capability with adjustable current and timeout settings

• Selectable Step Resolution from Full Step to 256x Microstepping

• Has three optically isolated control inputs and one optically isolated control output

• Pole Damping Technology™ integrated within driver board

Dip switches and a RS485 interface are built-in to the R325P Controller. A USB connection can

be used by using the USB485 Converter Card (sold separately).

2. ELECTRICAL SPECIFICATIONS

Supply Voltage: +12 to 48 VDC

Phase Current: 0.3 to 3.0 Amps Peak

NOTE: Phase current of 2.7 Amp and above REQUIRES an additional heatsink,

make sure the temperature of the bracket does not exceed 45° C.

I/O Specifications

3x Optically Isolated Inputs (1 fixed)

1x Optically Isolated Output

Minimum Motor Impedance: 1.5 mH

Note: The drive may behave unpredictably if the motor you are using has an inductance less

than 1.5 mH.

R325P User Manual Page 5 of 20 5/29/2013 Version 1.01

1 2 3 4 5 6 7 8 9 10 ... 19 20

Keine Kommentare

Rms-technologies R325P DRIVER Bedienungsanleitung Seite 5