Rms-technologies IMC17 INTEGRATED MOTOR CONTROLLER/DRIVER Bedienungsanleitung PDF herunterladen (Seite 7)

Flow Control None

4. MECHANICAL SPECIFICATIONS

Dimensions

A. DB-9 connector for I/O, Power and Communication

B. Motor Shaft Length: standard length is 0.94”. Customized length is available.

C. Motor Shaft Diameter: standard shaft diameter is 0.1968”. Customized

diameter length available.

D. Overall Body Length: Motor body length is available in various lengths

Model IMC17-S (2.69”)

Model IMC17-M (2.92”)

Model IMC17-L (3.24”)

E. Encoder Pinouts

*Index is optional and must be specified during ordering

IMCE17 Encoder Pinouts

NOTE: This is not a closed loop system. The encoder does not feedback to the

controller. A separate PLC or controller must be used to communicate between this

controller and this encoder.

• A choice of 32 to 1250 cycles per revolution (CPR)

• 2 Channel Quadrature

• TTL Squarewave Outputs

• Optional index (3

Channel)

• E2 US Digital Encoder

RMS Technologies Page 7 4/3/2009

IMC17/IMCE17 User Manual Rev 1.06

Pin 5

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Keine Kommentare

Rms-technologies IMC17 INTEGRATED MOTOR CONTROLLER/DRIVER Bedienungsanleitung Seite 7